The axle assembly, armrests, footrests, caster housing, and anti-tip tubes all utilize new innovative technologies that significantly reduce adjustment and setup time. It's easy to order and is built on Quickie's longstanding tradition of quality and durability.
Single Tool Adjustments
The majority of the frame setup adjustments can be made using one 10mm hex head wrench. The bolts are located on the inside of the frame to minimize visibility. They bolt directly into internal inserts, eliminating the need to secure a nut on the opposite side while tightening the bolt. The end result is a clean look and an easy adjustment.
Low Seat-to-Floor Heights
For users with tall cushions, low desks/tables, short legs and/or the need to propel by foot, a low seat-to-floor height is critical. The Quickie QXi hemi side-frame meets this need by accommodating seat-to-floor heights as low as 12 1/2". Best of all, this same hemi side-frame accepts all the footrests and legrests that are used with the standard side-frame.
Designed for Durability
Quickie engineers designed the QXi to beat industry key ANSI/RESNA durability tests by 3 to 4 times. In short, it's one tough chair!
Built to meet the requirements of HCPCS code: | K0005 |
Product Weight: | 13kg. (16 x 16 with padded swing-away armrests and 70° footrests) |
Product Width: | 14" - 20" seat width |
Product Length/Depth: | 14" - 20" seat depth |
Product Weight Capacity: | 120kg. |
Overall Width: | 26" (for 18" wide seat with 0° of camber) |
Caster Options: | 4" x 1", 4" x 1.25", 5" x 1", 5" x 1.5", 6" x 1", 6" x 1.5", 8" x 1", 8" x 1", 8" x 1.5" |
Rear Wheel Options: | 20", 22", 24", 25", 26" |